Mounting and supply
Rail position, supply, and what has to be de-energised.
Placeholder
Step-by-step: rail position relative to the main breaker, supply terminals and their labels, torque, minimum clearances, and the de-energising sequence. Needs the terminal designations from the production drawing and one photo per step of a real board.
What is settled
The unit is 4 TE wide and mounts on a standard DIN rail. It draws 6 W from 110/230 V~ ±10 %. It is rated −25 °C … 45 °C, IP2X, UL94-V0.
Everything else on this page needs the assembly drawing before it can be written down.